 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Flex36
(Up to 16,000 lb. capacity)
Stellar SI810 Series Hook Hoist
- Full Length Subframe
- Container is fully supported while in dump mode.
- Container is supported at 8 points: Four side rollers, two flange rollers and two container guide support brackets.
- Greatly increased stability while dumping a load.
Unnecessary fatigue on the hook arm assembly is alleviated by container supports and side rollers. This provides a stable platform for the container to rest on.
Container supports carry the weight of the roll off container in lieu of the hook assembly of the container. This removes stress on the pull hook of a loaded container in transit.
A superior paint finish is applied by using a two-part polyurethane paint system (prime and topcoat). After application the paint is baked on to insure proper cure for exceptional durability.
SI810 Specifications |
|
| Chassis C.A. | 108", 120" |
| G.V.W. | 33,000 lb. recommended |
| Shipping Weight | 3,750 lb. (approx.) |
| Load Capacity | 20,000 lb. |
| Hydraulics | 3,000 PSI Operating |
| Gear Pump | 23 GPM @ 1,500 RPM |
SI810 (32" Frame Height) |
108-36 | 108-54 | 120-36 | 120-54 | ||||
| Container/Body Length | 11' | 12' | 11' | 12' | 12' | 13' | 12' | 13' |
| Load Angle (Degrees) | 33 | 30 | 29 | 27 | 30 | 27 | 27 | 25 |
| Dump Angle (Degrees) | 53 | 53 | 53 | 53 | 53 | 53 | 53 | 53 |
| Truck Frame Height | 32" | 32" | 32" | 32" | ||||
| Lowest ground to hook | 22" | 8" | 22" | 8" | ||||
| Hook Height | 36" | 54" | 36" | 54" | ||||
SI810 (40" Frame Height) |
108-36 | 108-54 | 120-36 | 120-54 | ||||
| Container/Body Length | 11' | 12' | 11' | 12' | 12' | 13' | 12' | 13' |
| Load Angle (Degrees) | 36 | 34 | 31 | 30 | 34 | 31 | 30 | 28 |
| Dump Angle (Degrees) | 53 | 53 | 53 | 53 | 53 | 53 | 53 | 53 |
| Truck Frame Height | 40" | 40" |
40" | 40" | ||||
| Lowest ground to hook | 30" | 11" | 30" | 11" | ||||
| Chassis Cab to Axle | 108" | 108" | 120" | 120" | ||||
| Effective Length | 141" | 128' | 141" | 140" | ||||
| Min. Clear Truck Frame Length | 148" | 148" | 160" | 160" | ||||
| Bar Height (to bottom of bar) | 35 5/8" | 54" | 35 5/8" | 54" | ||||
| Axle to Rear Frame | 40" | 40" | 40" | 40" | ||||
| Hold Down Location (from hook) | 124 1/2" | 123 1/2" | 136 1/2" | 135 1/2" | ||||
| Hook Height | 36" | 54" | 36" | 54" | ||||
