Stellar Industries, Inc. | EC4000 Service Crane

Dealer Login | Site Map | Contact

Telescopic Cranes

EC Series Cranes

Knuckleboom Cranes

Specialty Series Cranes

Stellar Industries EC4000 Service Crane

Defining Characteristics

Planetary Drive Winch System
The winch is equipped with a 1.8 HP permanent magnet electric motor with a 315:1 planetary gear reduction system. This ensures that your winch will never quit lifting before it reaches the full rated capacity.

Double Boom Design
The double boom design makes it nearly twice as strong as the nearest competitor.

Gear Bearing Rotation
Uses same rotation system as the larger class cranes. There are no plastic bushings or brass gears in the rotation system. It uses a high strength steel ball bearing turntable gear, a high strength steel worm gear, and a cast steel worm gear housing.

Integral Rotation Stop
410 degrees of rotation with an integrated rotation stop. Integrated stops allow you the greatest performance while protecting wires and hoses from damage.

16’ or 20' of Reach
Hydraulic 1st stage extension. Manual 2nd stage extension.

Radio Remote
Comes standard with a radio remote control.

Specification Information - 16' Option

Crane Rating: Standard Boom Length: Boom Extension:	16,000 ft-lbs (2.21 ton-meters) 8’ (2.44 m) from CL of Crane 1st stage: Hydraulic 48" (121.9 cm) 2nd stage: Manual 48" (121.9 cm)
Max. Horizontal Reach: Maximum Vertical Lift: Boom Elevation: Stowed Height: Mounting Space Required: Shipping Weight: Controls: Winch:	16’ (4.88 m) from CL of Crane 17’ 4” (5.28 m) (from crane base) -5 degrees to +80 degrees 28.53” (72.47 cm) 19” x 19” (48.3 x 48.3 cm) 970 lbs (440 kg) Radio control standard for all functions. Rope Length: 90’ (27.4 m) Rope Diameter: 5/16" (.79 cm) Line pull speed: 15 ft/min (4.6 m/min) Max. single part line: 2000 lbs (905 Kg) Max. double part line: 4000 lbs (1815 Kg)
Rotation: Lifting Capacities:	410 degree power (worm gear) 4000 lbs @ 4’ (1814 Kg @ 1.22 m) 935 lbs @ 16’ (420 Kg @ 4.88 m)
Power Supply Required:	12 volt power unit 2.0 gpm @ 2300 psi (7.57 lpm @ 159 bars)

Specification Information - 20' Option

Crane Rating: Standard Boom Length: Boom Extension:	16,000 ft-lbs (2.21 ton-meters) 10’ (3.05 m) from CL of Crane 1st stage: Hydraulic 60" (152.4 cm) 2nd stage: Manual 60" (152.4 cm)
Max. Horizontal Reach: Maximum Vertical Lift: Boom Elevation: Stowed Height: Mounting Space Required: Shipping Weight: Controls: Winch:	20’ (6.10 m) from CL of Crane 21’ 3 ” (6.48 m) (from crane base) -5 degrees to +80 degrees 29.53” (75 cm) 19” x 19” (48.3 x 48.3 cm) 1180 lbs (535 kg) Radio control standard for all functions. Rope Length: 90’ (27.4 m) Rope Diameter: 5/16" (.79 cm) Line pull speed: 15 ft/min (4.6 m/min) Max. single part line: 2000 lbs (905 Kg) Max. double part line: 4000 lbs (1815 Kg)
Rotation: Lifting Capacities:	410 degree power (worm gear) 4000 lbs @ 4’ (1814 Kg @ 1.22 m) 800 lbs @ 20’ (363 Kg @ 6.1 m)
Power Supply Required:	12 volt power unit 2.0 gpm @ 2300 psi (7.57 lpm @ 159 bars)

*Subject to change without notification

NOTE: All Stellar cranes meet ANSI B30.5 and OSHA 1910.180 specifications.