 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
The Stellar Container Handler (SCH)
The Stellar Industries Container Handler (SCH) can meet all your container delivery,
switching and now dumping with the optional 360° rotator attachment. Move front-load, rear-load and side-load containers.
 |
Container lift forks are made of heat treated 4150 steel that easily fold out of the way so the unit is as versatile as a service truck. |
| STANDARD FEATURES | |
|---|---|
| Capacity | 2 through 10 cubic yd. containers |
| Self-leveling Forks | 1 1/4" x 4" Bar, 4150 steel |
| Cylinders, Fork Tilt | Two 4" Bore x 29" stroke |
| Cylinders, Lift | Two 4" Bore x 32" stroke |
| Cylinder Pivot Points | Bronze bearings |
| Fenders | 12 GA. steel |
| Hydraulic Tank | 10 gallon capacity |
| Controls | Inside & outside of cab |
| Lift & Rotator Capacity | 8,000 lbs. *(see FMVSS caution note) |
| Grease Fittings | At all wear points |
| Pump | 11 gallons per minute |
| Valve | 20 G.P.M., 2 spool |
| Filter | 200 mesh, in-tank suction strainer / 25 micron, return filter |
| Operating Pressure | 1200 P.S.I. |
| Container Bumpers | Molded rubber |
| Stacking Capability | 2-8 yd. |
Stellar Handlers are designed to lift 8,000 lb. loads. However, truck chassis manufacturer's specific body and equipment weight and CG limitation must not be exceeded. Container Handler installation will require calculation of CG for compliance with Federal Motor Vehicle Safety Standards (FMVSS). |
|
.
RELATED LINKS
» Container Handler Brochure