 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
STANDARD EQUIPMENT |
|
| Hoist rated capacity | 60,000 lbs. |
| Main frame | 8" x 4" x 1/2" A500 C tubing |
| Sub frame | 4" x 2" x 1/4" A500 C tubing |
| Front stop | 1 - 1/2" plate |
| Container lock | Automatic spring loaded |
| Lift cylinder shaft | 2 - 1/2" solid steel |
| Rear hinge shaft | 3" solid steel |
| Cable | 7/8" (6 x 37 EXIWRC) |
| Cable sheaves | 10" O.D. Bronze-bushed sheave |
| Cable anchor | 4 cable clamps |
| Cable end | Steel casting |
| Rear hold down | 1" plate located for std. containers |
| Middle hold down (IO & IOX Models) | 3/4" plate |
| Lift Cylinders | 6" x 72" D.A. |
| Reeving cylinders | 7" x 80" D.A. |
| Direct mount pump | Gear types 35 GPM @ 1500 RPM |
| Operating pressure | 1850 PSI |
| Hydraulic valve | 2 spool 45 GPM safety bypass |
| Hydraulic reservoir | 60 gal. 25 micron filter & screen filter |
| Outside rollers | 4" O.D. with bronze bearing |
| Inside rollers (IO Models) | 6" O.D. hardened roller & pins |
| Working points | Greaseable |
| Safety stand | Factory installed |
| I.C.C. Bumper | Folding, mounting lugs factory installed |
| Rear Bumper | Pre-drilled bolt mount - sealed beam backup, clearance and tail lights |
| Hoist up | 30 sec. approx. |
| Hoist down | 15 sec. approx. |
| Cable in | 46 sec. approx. |
| Cable out | 37 sec. approx. |
| Container length | 18' - 22' |
| Approximate weight | 6100 lbs. |
| Back-up alarm | Steam cleanable, 97 decibel, meets OSHA/state reg. |
| Mud flaps | Flex rubber, bolt-on |
| Tail frame (ORX & IOX Models) | 3" x 7" A500 C tubing with (2) 1/2" |
| Hydraulic valve | 3 spool 45 GPM safety bypass (EX Models) |
| Cable end (HH Models only) | Steel casting, knuckle-type |
| Rear flange roller (HH Models only) | 8" O.D. hardened with 2 1/2" c-1045 shaft |
| Rear center sheave (HH Models only) | 8" O.D. hardened |
| Mid-body light kit | |
RELATED LINKS
